Zero radius steel sinks were the primary “square sinks” shown the marketplace. They provide a sleek modern look. Today in 2018, nearly all publications from the Kitchen and Bath Industry Publications are showing variations these square products. These original Zero Radius unit had sharp square corners. They are fabricated coming from a flat part of steel. The sides are folded up and welded together.

In addition for the modern look, a huge advantage of this approach is the sinks usually are not drawn like traditional stainless-steel sinks, so a sixteen gauge sink is sixteen gauge but not thinner due to the stretching. Heavier sinks usually are not only stronger and even more resistant to damage but quieter. Most traditional sinks have some of sound pads to lessen noise. The more sound pads, the cheaper the sink as being the pads should be made to make up for thinner or cheaper steel.

There are two disadvantages in the Zero Radius sinks. Because the fabricators begin with a flat part of steel, they just don’t drain well. If the countertop just isn’t dead flat, water can puddle at the front, back or sides. Even if they may be level, the sinks drain slowly. Many sinks have a very crease inside the bottom to produce them seem like they drain but it is deemed an illusion.

The second disadvantage could be the sharp edges are hard to clean, in particular the bottom corners the spot that the sides and bottom meet. A black spot can be cultivated in the corners.

To maintain your modern look and take away the cleaning problem, the forward-thinking sink manufacturers developed sinks with small radius corners, typically three-eights inch. These rounded corners make sink easy to completely clean and stiffen the sink to produce then quieter.

The small radius sinks are produced with the same method and also have the same problem with slow drainage and puddling should the sink isn’t flat.

Square Sink purchase Checklist

· Make sure any metal sink you get is certified 304 metal. If it is just not, it doesn’t match your appliances. Lesser grade steel also ages faster and won’t retain its shine. Be particularly careful should the sinks cost nothing with your countertop as most are manufactured from cheaper 301 steel or worse from steel containing not been classified. Some sink companies are applying coatings to suit the luster and shine of 304 nevertheless the coatings wear off, and you’re stuck with a dull sink.

· Make sure the sink will drain. The best looking sink is not any good if this does not drain.

· Check for certified 304 stainless so it will suit your appliances

· Who stands behind the sink? Internet companies are notable for selling a product instead of following program service. Knowing how to completely clean your sink is important as a high luster sink might need more maintenance versus the old drop-in sinks which were dull.

· Does the sink feature a grid set? A grid or grid set can be a wire frame that may be placed at the bottom from the sink to maintain the sink from scratching. Protecting the lower is important with today’s larger and heavier pans. All Stainless steel will scratch. The grids will protect the bottom with the sink where most scratches occur.

Recently the brand new PerfecFlo™ flow sink has been brought to the market. It is constructed from 304 stainless, has Drainfast Technology having a patented process, and possesses a team of sink and faucet professionals standing behind the sink.